CT400 IMCA-Sealed 604 Crate Engine, Dyno Tested, Race Ready

Run up front with the 400-horsepower CT400 crate engine (often referred to as the “604 crate”) featuring Fast Burn heads from GM Performance Parts. Now, Speedway Motors Racing Engines is offering this 604 crate engine as a dyno-verified package that is ready to race! These IMCA-sealed 604 crate racing engines are based on the popular Fast Burn 385 street crate engine, but include a racing-only 8-quart circle track oil pan with dual kick-out design, along with a valve cover breather kit and special “kool nut” rocker arm design. The assembly also includes an open-plenum high-rise intake manifold and 1.5:1-ratio aluminum roller rockers. The 604 crate engine includes a bulletproof bottom end, anchored by a forged steel crankshaft and hypereutectic pistons. The 23-degree, Fast Burn aluminum heads enable tremendous power in the small-block V-8 because of a unique chamber design that quickly and completely burns all of the air/fuel mixture – giving you maximum power. With the CT400 racing engine under the hood of your Modified or Late Model, you'll put a “fast burn” on the competition. IMCA sealed and approved for use in IMCA Dyno-verified horsepower and torque and will include a dyno sheet of your engine 400 HP @ 5500 RPM 400 ft. lbs. of torque @ 4500 RPM Piston rings are broken-in using a proprietary dyno program to ensure proper ring seal which increases horsepower Lifter preload and timing are set prior to break in procedure for race ready performance right out of the crate Piston rings are broken-in using a proprietary dyno program Lash and timing are individually tuned Engine is ready to race, right out of the crate IMCA-sealed for equal competition Popular in Modified and Late Model classes* 400 HP 5500 RPM 400 ft. lbs. of torque 4500 RPM 4.00″ x 3.48″ bore x stroke 9.6:1 compression ratio 92 octane recommended fuel 4-bolt main caps Cam lift: .474″ intake / .510″ exhaust Cam duration .050″: 208° intake / 221° exhaust 112° lobe separation 1.5:1 ratio aluminum roller rocker arms 2.00″ Intake / 1.55″ Exhaust valves Includes: Fully assembled long block Black steel valve covers w/ breathers Oil pump, pick-up, 8 quart oil pan Eliminator Vortec intake manifold Spark plugs 8″ harmonic balancer Front timing cover Dyno sheet of your engine IMCA-issued bolts and is approved for use in IMCA *Check track/series rules for approved applications. Highlights IMCA sealed and approved for use in IMCA Dyno-verified horsepower and torque and will include a dyno sheet of your engine 400 HP @ 5500 RPM 400 ft. lbs. of torque @ 4500 RPM Piston rings are broken-in using a proprietary dyno program to ensure proper ring seal which increases horsepower Lifter preload and timing are set prior to break in procedure for race ready performance right out of the crate Specifications Crate Engine Type: Deluxe Crate Engine Engine Displacement: 350 cu. in. Horsepower: 400 horsepower Compression Ratio: 9.72:1 Torque: 400 ft./lbs. Maximum RPM: 5,800 Camshaft Type: Hydraulic Roller Tappet Cylinder Head Material: Aluminum Piston Material: Hypereutectic Aluminum Crankshaft Material: Forged 4340 Steel Combustion Chamber Volume: 62cc Camshaft Duration (.050 in): 208° intake / 221° exhaust Camshaft Lift (in): .474 intake / .510 exhaust Bore x Stroke (in): 4.000″ x 3.480″ Carburetor Included: No Intake Manifold Included: Yes Distributor Included: No Connecting Rod Material: Powdered Metal Warranty: None Valve Covers Included: Yes Assembled: Yes Engine Balance: External Cylinder Heads Included: Yes Rear Main Seal Style: 1-piece Throttle Body Included: No Oil Pan Included: Yes Timing Cover Included: Yes Water Pump Included: No Harmonic Balancer Included: Yes Flexplate Included: No Flywheel Included: No Air Cleaner Included: No Spark Plugs Included: Yes Spark Plug Wires Included: No Computer Included: No Wiring Harness Included: No Cylinder Head Style: Assembled Intake Runner Volume: 210cc Intake Valves Included: Yes Intake Valve Diameter: 2″ Exhaust Valves Included: Yes Exhaust Valve Diameter: 1.55″ Camshaft Included: Yes Cylinder Heads: Fast Burn with LS-style Beehive Springs Rocker Arms: Aluminum roller Rocker Arm Ratio: 1.5:1 Block: 4 bolt main MFG. Part #: 19419604 Notes: Broke-in, dyno-verified HP/TQ, and IMCA-sealed for competition Sold in Quantity: Each Spark Plug Style: Angle Brand: Speedway Motors Racing Engines Emissions Notice Emissions warning: this part only legal for sale or use in California for racing (competition) vehicles which may never be used, registered, or licensed for use upon a public highway. Any other use renders the vehicle tampered and not legal for use on California public highways (any public street or roadway, public dirt road, public park, or publicly maintained right of way open to the use of the public for vehicular travel). Violations subject to $37,500 penalty per violation per vehicle, revocation of registration, loss of use on California public right of ways, and proof of correction for tampering. There are similar restrictions and penalties under federal law and the laws of all other states with penalties under federal law of up to approximately $45,268 per tampered vehicle and/or engine.